520mm Cleaning Width: Provides productive floor coverage while retaining a compact machine footprint.
Up to 1,200m²/h Rated Efficiency: Designed for routine cleaning of small and medium commercial areas.
Dual Brush Motors: Two 160W brush motors provide a combined rated brush power of 320W.
1.5–2 Hours Working Time: Supports scheduled cleaning without a continuous cable connection.
Compact Configuration: The 518 × 410 × 1,208mm body is suitable for storage and movement through restricted spaces.
The T1 is a compact 24V walk-behind floor scrubber with a 520mm cleaning path, dual 160W brush motors and a rated cleaning efficiency of up to 1,200m²/h.
T1 Procurement FAQ
Practical answers to the questions purchasing engineers commonly ask when evaluating the T1 for commercial floor-cleaning projects.
1. What size facility is the T1 suitable for?
The T1 is best suited to small and medium commercial areas that require a compact walk-behind machine. It has a 520mm cleaning width and a rated efficiency of up to 1,200m²/h. Typical applications can include shops, offices, restaurants, schools, healthcare facilities and restricted warehouse areas, subject to the floor condition.
2. How much floor area can the T1 theoretically clean per charge?
The theoretical coverage is approximately 1,800–2,400m² per charge. This estimate is calculated from the rated efficiency of 1,200m²/h and the specified working time of 1.5–2 hours. Actual coverage will be lower when the operator makes frequent turns, refills the tank or cleans heavily soiled floors.
3. Is the 520mm cleaning width suitable for narrow commercial spaces?
Yes, the 520mm cleaning path balances productivity with maneuverability. The machine body measures 518mm wide, allowing it to work in comparatively restricted spaces. Buyers should still measure doorways, elevators, aisles and storage entrances before confirming an order.
4. What brush power does the T1 provide?
The T1 uses two 160W brush motors, providing 320W of combined rated brush power. The dual-motor configuration supports consistent mechanical scrubbing across the 520mm cleaning path. Brush type and pad selection should be matched to the floor material and soil level.
5. How often will the T1 water tanks need to be serviced?
The T1 uses a 6L fresh-water tank and a 9L wastewater tank, so it is intended for compact-area cleaning rather than uninterrupted large-site operation. Refilling frequency depends on the water-flow setting, floor condition and cleaning method. Buyers with long uninterrupted routes should compare the tank capacity with their planned cleaning schedule.
6. Does the T1 leave the floor dry after cleaning?
The supplied specification does not state the squeegee width or vacuum-motor rating, so drying performance should be confirmed before purchase. Ask the supplier to provide the squeegee configuration, vacuum-motor power, water-recovery test results and replacement rubber-blade specifications when immediate floor drying is required.
7. What battery system does the T1 use?
The confirmed electrical specification is a 24V battery system. Battery capacity, battery chemistry and charging time are not stated in the supplied specifications. Buyers should confirm whether the quotation includes lead-acid or lithium batteries, the amp-hour rating, charger type and local input voltage.
8. Is the T1 easy to transport and store?
The T1 has a compact footprint but requires planned handling because it weighs 65kg. Its dimensions are 518 × 410 × 1,208mm. Confirm vehicle access, loading method, elevator capacity, storage height and whether the handle can be folded or removed before arranging transportation.
9. Which floor surfaces can the T1 clean?
The T1 should be fitted with the correct brush or pad for each hard-floor surface. Before ordering, confirm compatibility with the intended material, such as tile, sealed concrete, terrazzo, vinyl or stone. Sensitive and coated floors should be tested in a small area with the recommended pad and cleaning chemical.
10. What should an overseas buyer confirm before ordering the T1?
Confirm the complete electrical, water-recovery, consumable and after-sales configuration in writing. The purchase specification should include battery capacity and chemistry, charger voltage and plug, squeegee width, vacuum-motor power, brush or pad type, spare rubber blades, warranty coverage, packaging dimensions, gross weight and replacement-parts availability.
About this supplier
Guangdong Hewan Information Technology Co., Ltd., established in 2011, specializes in commercial and industrial cleaning equipment, including walk-behind and ride-on floor scrubbers. The company supplies cleaning equipment solutions to customers in multiple international markets.
Company overview
